CHA's Production Box Coater is designed for precision coating of a wide variety of sizes and shapes of parts fabricated from glass, metal, plastics and other industrial materials. Capable of sequential or co-evaporation from up to four electron beam guns, the CHA Box Coater can also incorporate thermal and ion beam sources.
Specifications:
- Dimensions: Rectangular and cylindrical sizes per customer specifications
- Sources: Any commercially available
- Pumping System:
- Ultimate vacuum: 10-8 torr range
- High vacuum: CTI Cryo-torr 400 cryogenic pump
- Diffusion pump (optional): 8000 liter/second, 16" nominal
- Mechanical pump: 50 CFM, dual stage
- Cold trap: 25 liter capacity, 2000 square inches of surface area, 10-12 hours holding time, 20,000 l/s for condensibles
- Water baffle: Optically dense, chevron type
- High vacuum valve: 16" I.D., vertical seal
- Valve sequencing: automatic and manual
- Utilities:
- Electrical (excluding power supply): 208/240/120/60Hz/80A, 5 wire with active neutral and equipment ground (other voltage available)
- Water: 3 GPM @ 60 PSI Delta P
- Air: Compressed, 85-125 PSIG
- Backfill gas: Dry nitrogen, 20-30 PSIG connected to vent
|
|
