 |
| Web Roll Coater |
 |
|
CHA's multi-process high vacuum Web/Roll Coating system is designed to coat Mylar, foil, flexible circuits and other thin plastic or metallic materials stored in continuous roll form. Typical process stations within the high vacuum chamber can include sputtering cathodes, electron beam guns, thermal sources, substrate heat, ion beam sources and Plasma Process Bar.
For more details, download the  Web/Roll Coater PDF (2.7MB).
Specifications:
Output |
Process Station |
Output |
Power Supply |
| Sputter Cathode |
20KW |
MDX-10 |
10kW |
| Electron Beam Gun |
8KW |
SR10-111 |
10kW |
| Thermal Source |
10kW |
RPS-6000 |
8kW |
| Heater Array |
4kW |
HPS12-HP |
12kW |
| Linear Ion Beam Gun |
1500C@200mA |
MPS-5001 |
2000V@300mA |
| Plasma Process Bar |
2kW |
HV8000 |
2000V@200mA |
|
- Line speed
- High speed range at 1-200 FPM
- Low speed range at 0.1-20 FPM
- Speed accuracy: +/- 0.1% of set point for either range
- Acceleration: 20 seconds to maximum machine speed
- Tension
- High range at 7-70 pounds total web tension
- Low range at 3.5-25 pounds total web tension
- Tension taper range: Adjustable 0-50%
- Core diameter: 3" inside
- Full roll diameter: 7" maximum outside
- Web process width: 13"
- Finished web width: 26+
- Web width: 28"
- Tension Accuracy: +/- 5% of setpoint
- Tensi Full Roll Diameter
- Line Speed: 0.2 to 40 FPM
- Speed Accuracy: +/- 0.1% of setpoint
- Acceleration: 20 Seconds to max machine speed
- Tension: 11.2 to 112 Pounds total web tensio
- Tension Taper Range: Adjustable; 0-50%
- Material Thickness: 0.5 to 2 mil plastic
|
|
